Troubleshooting guide
Steam Deck Game Mode Controller Layout: Fix Emulator Detection
Category: Handheld Emulation
You are in Gaming Mode with EmuDeck, your Deck controls work in Steam, but the emulator says no controller is detected. Here is a focused diagnosis.
Check the game mode controller layout
Open the emulator shortcut, press the Steam button, go to Controller Settings, and confirm the layout is set to Gamepad with Joystick Trackpad or your custom layout. If it shows Keyboard and Mouse or a desktop layout, the emulator will not see a gamepad. Change it to a gamepad layout, then fully close and relaunch the emulator. If the layout was already correct, proceed to the next check.
Verify input inside the emulator
With the emulator open, press a face button and watch for any response in its input settings. If nothing registers, return to Gaming Mode, open Steam Settings, Controller, and run the input test. If buttons register there but not in the emulator, the issue is the per-game steam deck game mode controller layout override, not the hardware. Remove any per-game layout override and retest.
Verification test
Launch a known-good emulator, open its controller configuration, and press A. If the button maps correctly and the emulator reports a connected controller, the fix is confirmed. If it still fails, restart the Deck and repeat the layout check once.
Rollback and recovery
If changing the layout breaks other games, revert to the previous layout in Controller Settings. If the emulator still fails, note the exact layout name and emulator version, then

Ask for help with those details so the next step is targeted.